Transformer - SMPS High Frequency Through Hole

Transformer - SMPS High Frequency Through Hole
Get a Quote
Get a Consultation

The Current Transformer ( C.T. ), is a type of “instrument transformer” that is designed to produce an alternating current in its secondary winding which is proportional to the current being measured in its primary. Current transformers reduce high voltage currents to a much lower value and provide a convenient way of safely monitoring the actual electrical current flowing in an AC transmission line using a standard ammeter. The principal of operation of a basic current transformer is slightly different from that of an ordinary voltage transformer.

Unlike the voltage or power transformer looked at previously, the current transformer consists of only one or very few turns as its primary winding. This primary winding can be of either a single flat turn, a coil of heavy duty wire wrapped around the core or just a conductor or bus bar placed through a central hole as shown.

Due to this type of arrangement, the current transformer is often referred too as a “series transformer” as the primary winding, which never has more than a very few turns, is in series with the current carrying conductor supplying a load.

The secondary winding however, may have a large number of coil turns wound on a laminated core of low-loss magnetic material. This core has a large cross-sectional area so that the magnetic flux density created is low using much smaller cross-sectional area wire, depending upon how much the current must be stepped down as it tries to output a constant current, independent of the connected load.

Related Products

Transformer - 400 Hz
Transformer – 400 Hz
Get a Quote
Get a Consultation
Transformer - Mounted
Transformer – Mounted
Get a Quote
Get a Consultation
Transformer - Low Frequency
Transformer – Low Frequency
Get a Quote
Get a Consultation
Transformer - Current Sense
Transformer – Current Sense
Get a Quote
Get a Consultation